light touc h switches/EVQ2 design and speci? cations are each subject to change without notice. ask factory for the current technical speci? cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. ? es124 ? a a' b b' e 1 v 2 q2 3 4 567 8 height 9 push plate color product code type 5n type 2r ligh t touch switches type: EVQ2 product chart =standard operat ing force positioning pin g round terminal height 4.3 mm 5. 0 mm 7.0 mm 9.5 mm 1.0 n without po sitioning pin with ground term inal without ground terminal 1.3 n without po sitioning pin with ground term inal without ground terminal 1.6 n without po sitioning pin with ground term inal without ground terminal 2.6 n without po sitioning pin with ground term inal without ground terminal speci? cations type sn ap action/push- on type spst electrical circuit diagram rating 10 a 2 vdc to 20 ma 15 vdc (resistiv load) contac t re sis tance 5 0 m max. insulation re sis tance 5 0 m min. (at 100 vdc) dielectric with stand ing voltage 250 vac for 1 minute bouncing 3 ms max. (on) 8 ms max. (off) mechanical operatin g force 1.0 n 0.4 n 1.3 n 0.4 n 1.6 n 0.5 n 2.6 n 0.6 n travel 0.25 mm 0.10 mm en du ra nc eo pe ra ti ng li fe 1 00000 cycles min. ? 5 0000 cycles min. operating tem per a ture ?20 c to +70 c storage tem per a ture ?40 c to +85 c (bulk) ?20 c to +40 c (taping) minimum qu antity/ packing unit top - push 1000 pcs. radial taping (reel pack) qu an ti ty /c ar to nt op -p us h 1 0000 pcs. ? 1 million cycles also available, consult our salesmen. recommended applications operating switches for electronic equipment explanation of part numbers features wealth of product types: with or without a ground terminal, vertical type, snap-in terminals, etc. can be automatically dip-soldered: integral molding of the terminals and main body prevents the escape of ? ux. sep. 2010 00
light touc h switches/EVQ2 design and speci? cations are each subject to change without notice. ask factory for the current technical speci? cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. ? es125 ? a b a b p q 6.0 0.3 6.0 0.3 3.6 2- 1.00 0.05 4.0 0.3 0.3 max. 0.5 max. 3.4 0.9 h circuit diagram 5.0 pwb mounting hole for reference (pitch tolerance: 0.1) view from mounting side jis c0806-2 shall be applied to the items not specified here. 1.0 max. 1.0 max. 0.3 12.7 1.0 12.7 0.3 0.8 0.6 0.5 3.85 0.70 18.0 +1.0 ?0 5.0 +0.8 ? 0.2 18.0 +1.0 ? 0.5 1.3 max. 1.3 max. 1.5 max. 0.6 0.3 ee' 6.35 0.70 6.0 0.5 9.0 0.5 adhesive tape adhesive tape shall not extend beyond base paper. p q the direction of or side is randomly settled. 2.0 max. e-e' section dimensions in mm (not to scale) pa rt nu mbers operating force h=height push plate color operating life EVQ21304m 1.0 n 4.3 mm white 100000 cycles EVQ21305r 1.0 n 5.0 mm red 100000 cycles EVQ21307k 1.0 n 7.0 mm black 100000 cycles EVQ21309k 1.0 n 9.5 mm black 100000 cycles EVQ21404m 1.3 n 4.3 mm white 100000 cycles EVQ21405r 1.3 n 5.0 mm red 100000 cycles EVQ21407k 1.3 n 7.0 mm black 100000 cycles EVQ21409k 1.3 n 9.5 mm black 100000 cycles EVQ21504m 1.6 n 4.3 mm white 100000 cycles EVQ21505r 1.6 n 5.0 mm red 100000 cycles EVQ21507k 1.6 n 7.0 mm black 100000 cycles EVQ21509k 1.6 n 9.5 mm black 100000 cycles EVQ22704m 2.6 n 4.3 mm white 50000 cycles EVQ22705r 2.6 n 5.0 mm red 50000 cycles EVQ22707k 2.6 n 7.0 mm black 50000 cycles EVQ22709k 2.6 n 9.5 mm black 50000 cycles EVQ2 with ground terminal 2-terminals type without ground terminal sep. 2010 00
|